Recent: Home max fs506x?

Mend > Satellite Navigation

Mend Navman iCN510 Gain Access Screws

How do I gain access to the battery of a Navman iCN510?

There appear to be four screws holding the front and back panels together but the these seem reluctant to be prised apart. Can anyone tell me how to safely gain access to the battery ? And having gained access to the battery is it easy to replace?

Philvin
March 2008
send your any TomTom, Garmin, Blaupunkt, Garmin, Magellan, Navman ... any GPS to our Hong Kong office, when we received it and then we will make a new battery for you is free charge, but you must be pay the shipping cost.

Cameron Sino Technology Limited

Unit 4, 17/F., Ho Lik Centre,
66A Sha Tsui Road, Tsuen Wan,
Hong Kong

Attn: Longman Cheung
Tel: +852 2426 9811
Email: longman@cameronsino.net

Cameron Sino Technology Limited
September 2008
I have taken a friends navman apart to repair the power connector.
You have to just force one edge apart and work your way around the unit, it has plastic clips that hold it together as well as the screws so a bit of 'delicate force' is required. Also dont forget to remove the map SD card as this stops you seperating the two halves. Good luck

Steve Whiles
May 2008
There are five screws not four the fifth is in the arial hinge you must also remove the map card the back then comes off quite easily and the battery just unplugs.

johniewideboy
March 2008

Related Questions ...

Mend stairlift lift works
2

Replace joystick on Stannah Stairlift?

The joystick on our Stannah stair lift requires replacing as it only intermittently works. The difficulty hav... [Read more]
Mend leisure range oven
1

Leisure Range Master Fan Oven element replacement?

Have Removed the screws from the fan cover However the element appears to have two screw that are fix in fro... [Read more]
Mend open 31 printer
2

How to open a Kodak Hero 3.1 All in one Printer?

Having removed the three accessible screws from the case of the above model, I can se no way to remove the sca... [Read more]
Mend gas cooker oven rangemaster
1

Rangemaster 110 Oven not working?

I would like to bypass the electric clock which is faulty .I assume this is the reason the oven does not work.... [Read more]
Mend washing machine remove damage
1

How do I get access to the lint trap on a WMD 967?

I need to remove the plastic trim panel that covers the bottom of the machine to gain access to the lint trap.... [Read more]
Mend washing machine replacement repair
1

Dysone CR01 Washing Machine Outer Door Hinge removal and Replacement?

The hinge for the outer door on my CR01 is cracked and needs to be replaced, I have been trying to find out be... [Read more]
Mend tefal gv steam
1

I have a Tefal GV 9360 steam generator?

I need to gain access to the mains cable winder to untangle the cable. There are special screws holding the bo... [Read more]
Mend replace food model
1

How to replace a clockwork timer on a Magimix food steamer?

Magimix food steamer model no 11191 has a faulty clockwork timer. Have new timer but cannot remove steamer bas... [Read more]
Mend cooker replacement element
1

REPLACING A GRILL ELEMENT IN A TRICITY MARQUIS COOKER Model No;-2587B?

The control panel is affixed to the splash plate at the back of the cooker. I have removed a screw from either... [Read more]
Mend tumble dryer repair hoover
2

Hoover Maxi 6 TV30?

My belt appears to have broken and yet I cannot gain access to it to repair. There are 3 screws at the top bac... [Read more]
Mend remove control panel
1

Tricity Bendix SI450 Replacing Thermostat?

How do I remove the control panel. I have undone the three screws on the underside but am still unable to gain... [Read more]
Mend window reg drivers
2

how to fix a squeaky window on renault laguna?

Hi all, Don't know if any one can help. I have a 54 reg renault laguna estate and the drivers windows stic... [Read more]
Mend Mondeo Central Locking Door Lock
3

Central locking, Ford Mondeo?

The driver's door locks o.k. manually, but does not open on this door. I have removed all the screws from th... [Read more]
Mend element fan assisted
1

Removing backplate screws to replace a heater element?

I need to check and possibly replace the heater element in my fan assisted Bosch oven. The oven is 6 years onl... [Read more]
Mend door dryer unit
1

How do I reverse the door on a Zanussi ZDC67550W Tumber Dryer?

Looking at the unit it seems very easy to reverse the door. The hinges can be removed and the plastic covers ... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Satellite Navigation ...

Related Categories