in addition to my first question meant to add that P comes up on the control panel which indicates a
(LIVE ON NEUTRAL CONNECTION). the guy who has checked the boiler is stumped. not sure he knows what a live on neutral connection means (not sure i do either) thought live on neutral would blow fuse!! even tried another pcb same problem. anyone who has any ideas i would be eternaly grateful!!! house is freezing!!
Hi just popping in to thank you for the kind words and the recommendations for me to repair these boards if you know anyone who has boiler board faults then just drop me an email i will help as much as i can.
Thanks Again
kevin mercer
July 2011
Thanks to this forum, and to Kevin Mercer, my boiler works perfectly! It saved me the cost of a new board at £250 or more likely the cost of a new boiler. Kevin returned this board to me within a few days and I would happily reccomend him.
John Newton
June 2011
I can also reccomend Kevins services 3 days from postage to return and a now have a fully working boiler.
Can't thank enough.
DJ Carlos
April 2011
I can recommend Kevin Mercer for boiler pcb repairs. I now have 2 working pcbs for my Potterton boiler (one as a back up/ spare) thanks to Kevin.
Calvin French
March 2011
Hi
I repair potterton envoy control pcb`s they have obvious faults which easily repaired at a cost of £45.00 including return postage I also repair many other boiler control boards if you would like more info on my repair service please contact me on kevinmercer@btinternet.com
Thanks Kev
kevin mercer
April 2008
hi ronald
iv`e recieved my pcb back from the guy i sent it to and it works a treat. it was only 40 quid to get it repaired(very reasonable i thought).
his e-mail address is kevinmercer@btinternet.com
if you send him an e-mail he will give you the address to send the board to.
yanny.
yanny
March 2008
I have 2 Envoy 50 boilers, they really are cr*p. If it was working before then it is very unlikely that there really is live on the neutral. More probably the PCB is knacked. In this condition they give all sorts of fault codes. Try another (new) pcb if possible. They are very expensive and I now have 2 broken ones. Let me know if you find a repair service
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix home heating systems.