hotpoint aquarius WF541 FAULT IN CYCLE?

When ii put a cycle on it lights up wash but nothing happens ive checked the pipe and the filter but how fo i check the pressure swith please help

paul s
March 2013

lights 2 and 5 are on my aquaris machine what does that mean

trace
September 2010

hotpoint aquarius wf541 flashing led lights 2,4,5. On off switch flashing water will not pump out. please help

Miss world
January 2010

the light on mine are flashing and not pumping out the water on it ?

ed
August 2009

door will not open, water in drum,

j lee
June 2009

i have flashing lights, ive checked the pressure switch and blew down the pipe but lights still flash though half the cycle how do i stop this.

anna
May 2009

i have managed to fix the flashing lights and my washer is working but the spin isnt spinning as iut should and sounds very noisy. Any ideas?

woolie
April 2009

Check the pressure switch - a round item about 3 inches across with several wires connected, it sits under the top cover. Its an air operated switch which tells the machine water has reached the correct level. Disconnect the thin rubber pipe from the switch and blow down through it to clear any blockage. Switch itself may be faulty but its more likely the pipe is blocked.
Also check the filter - generally located behind a panel at the foot of the machine.Some are obvious like little square hatches and some are hidden behind the trim panel at the foot of the machine. Once panel is removed the filter will be seen. Its a circular fitting which generally unscrews in an anticlockwise direction.
Some filters are pretty well disguised by the manufacturers which is a big help to their customers and some machines have no filters at all which allows all manner of debris and detritus directly into the pump.
Check out this site for spares : www.4directelectricals.co.uk
Check out this site for info: www.2ndwave.co.uk/manual.html

dan
February 2008