You state in the beginning the Element burnt out? Have you found the reason it burnt out. Elements very rarely ever burn out unless you have a faulty thermostat and this should have also been replaced as well as the element.
You must understand that what you have done could have been dangerous or costly on your pocket or both. Fitting another element before finding the reason why the first one burnt out is not the way to go. 1.Firstly deduce why the element went in the first place if it has burned out then there is a problem most likely with the thermostat. If you are going to continue using this drier replace the thermostat now!
Carlito Corway
January 2008