How can I resit access pin code on a BT synergy 2110 base station?

Thank You Sorted My Base 2110

david
December 2014

"Power off the mains - leave for 1min or so.
Press and hold the PAGE button while turning on the power, until the phone stops beeping (5 tones then a doo-daa-doa)!
Release the PAGE button, then press it 5 times quickly, this should then sound another doo-daa-doo.
Thats it - factory reset to the base unit, PIN back to 0000."

Thanks Gwyn this worked for me on my 2150 :)

Chris
May 2008

As yet another person with exactly the same problem (that is, forgetting whatever the PIN number was), I can confirm that, eventually, I managed to do a "hard reset" on the base unit PIN and it worked.

It wasn't quite as straightforward as the instructions appear (at one point, I thought I'd completely lost comms between handset and base unit) but I got there in the end!!

Andy CS
May 2005

This may be the same answer as for the 2150 mentioned for a question asked earlier which says:
"Do a HARD reset on the base unit.

Power off the mains - leave for 1min or so.
Press and hold the PAGE button while turning on the power, until the phone stops beeping (5 tones then a doo-daa-doa)!
Release the PAGE button, then press it 5 times quickly, this should then sound another doo-daa-doo.
Thats it - factory reset to the base unit, PIN back to 0000."

Worth a try

Gwyn
May 2005

Did you sort your problem, because I have the same problem and am looking for a fix

Jayne
March 2005