Recent: Will I need to replace my garden tap?

Mend > Electric Cookers

Mend Neff Work Power Suggestions

my neff oven doesnt work after power cut but clock still flashes?

any suggestions

David
December 2007
After ages trying to get the oven light glass off to replace the bulb I finally succeeded with a combination of WD 40, tapping lightly with a meat hammer & using the gel pad that goes under a jar to stop it turning when you take the top off which gave me a good grip. Hooray! Flushed with success I was then bamboozled by the bottom oven not working at all afterwards while the top oven/grill was fine. Having seen these posts I was gobsmacked to find that re-setting the clock was the answer so thank you so much for saving my sanity. Both ovens & lights now working.

Wistful100
January 2022
This worked for us too! Thanks for the tip!

Svally
March 2021
Read above that setting the clock (to any old time) would do it.
Worked for me too. Thank you

Michael in Worrall
January 2015
I reset my clock and Tada oven works thanks

Jody
December 2014
This is the perfect, well received answer! Even now in 2014.
Thank you both.

Rebecca
August 2014
I had this problem after a power cut - you need to reset the clock time, then the oven works again. This really confused me when I bought me flat...

Colin
January 2008
You have to set the clock. Basically press down the 2 far left buttons and twiddle the knob to the right time. It should then work fine!

Vicky
December 2007

Related Questions ...

Mend cd player remote
3

10 CD Steepletone Juke box will not work!!?

The lights work down the side and top where discs spin around, but I cannot get anything else to work, not eve... [Read more]
Mend start renault again
2

URGENT how can i start my renault again ???????!!!!!!!!!!!?

car just stopped now cant start it...so what happened was ;serpentine belt snapped, battery drained flat by no... [Read more]
Mend mira shower problems
2

Mira shower problems?

I am on my 3rd in 8 years Mira ALT shower. Intermittent problems as follow: Turn power on to shower, push st... [Read more]
Mend power gone not fuse
1

Power gone, not fuse, plugs in and no power light?

Has run perfectly for over 20 years. plugged it in and "something" caused a flash. Thought it might be a fus... [Read more]
Mend gbc ultima 65 laminator
2

GBC Ultima 65 Laminator?

Laminator runs fine for about 2-3 feet of lamination, then just stops-power is on, heat is on, rollers just st... [Read more]
Mend code buy machine
1

LG TROMM "LE" error code should I buy a new machine, ozone smell?

The other day I got the dreaded LE error code. The washer was not loaded more than usual. It is about 8 years ... [Read more]
Mend started suggestions bought
1

Singer 438 machine will not stop?

My wife's machine started to work without foot control being used. Tried all the suggestions bought new parts,... [Read more]
Mend boiler thermostat central heating
1

Ravenheat heating thermostat transmitter does not work?

My Vaillant combi boiler provides hot water but the Ravenheat transmitter type thermostat has stopped working ... [Read more]
Mend washing machine power reset
1

my indesit washing machine won't power up can anyone help?

I have an Indesit washing machine. It has been stored for 18 months. Now I need to use it I'm finding it won... [Read more]
Mend How to mend it?
1

Problems turninh on Two Dab Radios?

I have two dab radios Logik L44DAB10 and Ferguson FRG-R116D which have both stopped turning on. When I press ... [Read more]
Mend help alarm died
10

Help with battery replacement for Scantronics 9449?

I have an old house alarm which was working well until battery died. I am trying to install replacement batt... [Read more]
Mend power surge working
1

Hotpoint Wf740 power surge?

My hotpoint WF740 has stopped working since we had a nearby lightning strike - I suspect the main PCB is gone.... [Read more]
Mend How to mend it?
1

TEC MA-1450-1 Series Shutoff?

Periodically the register will shutoff during a transaction. The amount is entered into the dept key and valid... [Read more]
Mend help brand working
1

please help me fix my dimplex xms724n?

I bought it brand new about 18-20 months ago, stopped working when my friend leaned on it, we saw a small flas... [Read more]
Mend 100 after so
1

my speedfighter 100 looses power after so long,whats the problem??

i was riding my speedfighter to work which is around 20 mile away... then all of a sudden it just lost power t... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Electric Cookers ...