My kitchenaid professional series stand mixer won't turn on...?My professional series kitchenaid stand mixer won't turn on. The power is fine. The last time I used it, it got hot to the touch and had a bad smell. I turned it off immediately. And now, nothing! Help!...Click here for the fix.
Replace a Cord on a Kitchenaid 4c mixer?I cant see where there is a screw or device that lets me take me take off the the back cover to get to the cord.
Would someone take pity and explain clearly what to do
Thanks, Judy...Click here for the repair.
kitchen aid 550 professional burned up motor?I received as gift a Kitchenaid Mixer from canada. it works 110 volt and unfortunately has been used on 220!!! Itis possible to repalce the motor or fix it....Click here for the repair.
how to replace the power cord on a kitchenaid K5-A ?I can take it apart, but the cord goes in through the bottom middle, into a space I cannot see. The wires in the back don't seem to be attached to the power cord. Any ideas?...Click here for how to mend it.
Kitchen Aid - speed lever?Steve's response means that my KitchenAid is working again - but how do you replace the speed lever? The black covering of mine has come off and I have the replacement but can't easily work out which screws to undo to get to the lever....Click here for how to mend it.
kitchenaid mixer model k5m90wh?kitchenaid mixer model k5m90wh is having some old leaking around the head of the mixer. Removed a couple screws under the head and some oil is there too. Do I need to take the unit apart and re-grease the bearings.?...Click here for how to mend it.
Kitchenaid KP2671XNV will not turn on.?Our Kitchenaid stand mixer KP2671XNV will not turn on. I'm not sure if it is the speed control board or the motor that is the problem. Power is getting to the board and when the speed control lever is moved to turn the unit on, I get power through the "motor 1" wire but none through the "motor 2" w...Click here for the fix.
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.