Other users of howtomendit.com provide the answers. The more detail and information you provide in your question the easier it is for others to help you.
My mixer will spin one partial spin if I slam the switch onto speed 5. Otherwise it does not move. I have replaced the phase board, control plate and brushes and that did nothing. I see the control plate spark when I slam the switch on so i know it is getting power initially, but it does not seem to stay on.
Blender lights flashing and smoking?Kitchenaid blender lights blinking and smoking...Click here for the repair.
My kitchenaid professional series stand mixer won't turn on...?My professional series kitchenaid stand mixer won't turn on. The power is fine. The last time I used it, it got hot to the touch and had a bad smell. I turned it off immediately. And now, nothing! Help!...Click here for how to mend it.
How to disassamble kitchenaid KSM90 mixer?Need to remove cover to service model KSM90...Click here for the fix.
Replace a Cord on a Kitchenaid 4c mixer?I cant see where there is a screw or device that lets me take me take off the the back cover to get to the cord.
Would someone take pity and explain clearly what to do
Thanks, Judy...Click here for the repair.
kitchen aid 550 professional burned up motor?I received as gift a Kitchenaid Mixer from canada. it works 110 volt and unfortunately has been used on 220!!! Itis possible to repalce the motor or fix it....Click here for the repair.
how to replace the power cord on a kitchenaid K5-A ?I can take it apart, but the cord goes in through the bottom middle, into a space I cannot see. The wires in the back don't seem to be attached to the power cord. Any ideas?...Click here for how to mend it.
Kitchen Aid - speed lever?Steve's response means that my KitchenAid is working again - but how do you replace the speed lever? The black covering of mine has come off and I have the replacement but can't easily work out which screws to undo to get to the lever....Click here for the fix.
kitchenaid mixer model k5m90wh?kitchenaid mixer model k5m90wh is having some old leaking around the head of the mixer. Removed a couple screws under the head and some oil is there too. Do I need to take the unit apart and re-grease the bearings.?...Click here for how to mend it.
Attempting
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.
2003 vE