Better late than never.... 1) Pop of the speed control knob and remove the 2 flathead screws under it. 2) remove the accessory knob on the front of the mixer. 3) The top cover of the mixer should now come off. Remove it. 4) under the rear hemisphere of the mixer is a small flathead. Remove it. 5) the rear hemisphere should come off easily. 6) there are wire nuts on both sides of the speed control plate that I believe the cord connects to.
My kitchenaid professional series stand mixer won't turn on...?My professional series kitchenaid stand mixer won't turn on. The power is fine. The last time I used it, it got hot to the touch and had a bad smell. I turned it off immediately. And now, nothing! Help!...Click here for the repair.
kitchen aid 550 professional burned up motor?I received as gift a Kitchenaid Mixer from canada. it works 110 volt and unfortunately has been used on 220!!! Itis possible to repalce the motor or fix it....Click here for the fix.
how to replace the power cord on a kitchenaid K5-A ?I can take it apart, but the cord goes in through the bottom middle, into a space I cannot see. The wires in the back don't seem to be attached to the power cord. Any ideas?...Click here for the repair.
Kitchen Aid - speed lever?Steve's response means that my KitchenAid is working again - but how do you replace the speed lever? The black covering of mine has come off and I have the replacement but can't easily work out which screws to undo to get to the lever....Click here for the repair.
kitchenaid mixer model k5m90wh?kitchenaid mixer model k5m90wh is having some old leaking around the head of the mixer. Removed a couple screws under the head and some oil is there too. Do I need to take the unit apart and re-grease the bearings.?...Click here for the fix.
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.