Mend > Lawn Mowers

Drive Belt comes off usually when I chnge directions?

I have a Murray 46901x92B, with a 16 HP engine. The drive belt would occasionally come off at the rear, under the battery. I was told to replace the drive belt as it may be streached. I did, but it will still come off. The clutch seems to be slack and will not return fully back toward the driver. It is easy to put back on when you engage the clutch. What do I need to do?

Joe Sparkman
December 2011

Murray Garden Tools, Lawn Mowers Drive Belt Engine

Dont know the model, but from what you say, engaging clutch, must move the parts away from each other, thats why it is easy to get it on then. As it comes off, that is usually down to a slight misalignment, both units need to run square to each other, other wise belt will be driven off, which it sounds as if that is happening, some part of the clutch mechanism, which ever part it moves, is sticking, or catching on something. ie. if motor moves when using clutch, possibly slow to move at bottom end, so belt will come off, etc. Check as to what moves, clean and if needed grease runners etc, until you have a good look you will not see why, but hopefully I have pointed you in correct direction.

SD
December 2011

Automatic Answer

While you wait for answers, we may have found some information which could help you.