Mend > Sewing Machines

Can I replace a Beaver 4 with Beaver 2 part?

I have a Beaver 4 sewing machine and the Hand wheel has a crack. Can I replace the Hand wheel and clutch with ... [Read more]

Engine revving up ?

Engine won’t stop revving up, only way is to turn it off Singer 317

Threading bobbin problem?

I have a Singer CG 550 C. When i fill the bobbin, the thread is not evenly filled from bottom to top.

Spare parts for frister and rossmann 404 ?

Who do I contact to get a replacement part for my buttonhole lever? The bottom plastic part has got lost and I... [Read more]

Bobbing Timing issue?

Hi, I have a Lervia KH 4000 sewing maching. the needle won't thread with the bobbin. Everything seems to work ... [Read more]

BL 7500 Babylock?

How do I index the bobbin carrier? It fell out when I was fishing for a broken needle and now the new needle ... [Read more]

kenmore 385 12916890 thread guide?

had to take off thread guide and set screw and dont know how to line them back up

spool winding ?

why do the spools not wind smother, t The cotton stay in the same place all the time

Tension wont move on Frister Rossman 972?

The upper thread tension seems too tight, the upper thread keeps breaking and adjusting the tension doesn't se... [Read more]

My Kenmore 18230790 no longer will reverse?

My Kenmore 18230790 no longer will reverse. Stitches are great, but I cant backstitch to lock them No sound... [Read more]

What is wrong with the presser foot lever?

Presser foot lever will not stay up... and so the fabric does not go thru feed dogs properly. Brother GX3... [Read more]

How to replace the tension knob on my Frister Rossman machine? ?

Can anyone tell me the sequencing of replacing the tension adjustment on my Frister Rossmann Star 114 F/A Rang... [Read more]

Frister & Rossmann 504 Stuck in reverse ?

On off reverse button stuck how do I fix

How to fix clutch?

When trying to wind bobbin on my Frister+Rossmann Cub 6/7 sewing machine it will not wind when I pull out the ... [Read more]

How can I open a Singer 507 pedal?

Hi I have a singer 507 model and when switched on it runs at full speed. I read below that if you take the cap... [Read more]

how can i stop crown point SZA-708-F-BH?

My machine operates continuously and will only stop when I switch it off at the mains

Problem loading bobbin thread on Frister Rossman 66?

Haven’t used machine for a while. The bobbin won’t clic into place. So therefore won’t load. How can I f... [Read more]

Frister and Rossman trips RCD?

My FR trips the RCD when you press the foot pedal. So I replaced the motor, this did not fix the problem. ... [Read more]

Need an equivalent to an old Hunts WA71 capacitor/rectifier?

I think the capacitor or rectifier (not sure which it would be) in the foot control of an old but still workin... [Read more]

Seeing machine pedal?

I tried my machine which I hadn't used for ages, at first ok,then foot pedal started going by itself fast,then... [Read more]