My system works for a short time then sound cuts out for a while (10 mins or more) although power still on. When this happens sound still works through headphones.
Its a heating Problem. I put a Fan on it for a longer time and it is running perfekt.
The problem is that to lose the contacts and the solder joints must be soldered to.
Is very expensive to dismantle the device. I flexed the base plate at the location of the speaker terminals on. So I was able to resolder the board.
Harry
December 2011
Hi there Elaine, same problem here......
It's probably a faulty poweramp relais which switches between the headphone socket and the speakers.
Probably has to be replaced....not sure though....
I intend to replace this part myself (not easy to access :-(
or reconnect it with a solderbolt(?) if a loose connection is acting up....
Paul
November 2007
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
