My conderser tumble dryer is working but there is no heat. The cold is working. The barrel goes round, but when I click the button in to produce heat, there is none.
We had this with ours after a few months. It was repaired under guarantee. The repair man said the thermostatic fuse had gone (protects the unit in case it overheats, but is not resettable).
Robin
March 2008
I had the same problem after I forgot to empty the water. I did the following and it worked, but no promises:
Pull the tumble dryer out, remove the plastic panel on from the bottom right corner on the back to get to the float, empty any condensation out of the floats vessel (was only a few ml, not enough to have pushed the float up but as this was the only visible possibility maybe this wasn't helping things?), pull the float back down, and put everything back together.
Shouldn't have to do this in my opinion, but hope it helps.
Beth Fenn
November 2007
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix tumble dryers.