Mend > Gym/Fitness Equipment

How can i fix my Sportcraft TX400 Treadmill?

My treadmill works only for 7 seconds after i turn it on, and after it stops, the calorie counter displays 3, however, the speed sensor works just fine (i checked it with a multimeter), is there any chance there could be something else wrong with my treadmill?

Marcelo Ivan
October 2007

Sportcraft Sportcraft TX400 Leisure Equipment, Gym/Fitness Equipment Sportcraft Tx400 Treadmill

Can any 1 answer the code 3 on the distance screen? Mine stops after 7 sec and it shows up. Motor wrks good i lubed it and still nthn.

chris
August 2012

Our's is shocking us while we run. Has anyone else experienced this?

Waiting to be Shocked
June 2012

my tx 400 sounds as thought the motor wants to start but 6 sec after the calorie display shows 3

the sensor tests good (meter test). the motor is a new one

i've removed the belt just to see if the motor starts on its own but it does not. i'm suspecting that a component or components on the motor board is faulty.

I'VE also noticed if i increase the starting speed the unit runs o.k

frank
October 2011

the treadmill turns on just fine but once i hit start it runs for 10 seconds and then stops, all of the lights start to flash and then it restarts and im back to square one. how do i fix this or what do i have to repace.

sean
April 2010

Mine stops after a few seconds and displays a #4. What does this mean?

Poca
April 2010

Take the cover off over the motor, on the frame next to the pulley wheel is a little plastic sensor with 2 wires hooked to it. Give it a tap if that does not work it may need to be replaced.

Bruce Mungar
November 2009

same problem/ i cant find the sensor, meaning i do not know what it looks like therefor, i dont even know where to start. if someone could describe to me what it looks like and where it should be that would be great thanks:)

viviennna.
October 2009

go to http://www.sportcraft.com/asp/FAQ.asp and scroll down to the treadmills part. find E3 and it tells the way to fix it i'm just trying to figure it out myself

sean
August 2009

I just bought one off of a friend for $200 and i brought it home and it does the same exact thing, i have been trying to look up a motor for it, but i cant seem to find anything yet. because it seems that the motor doesnt was to pull the belt and it stops itself and i even smelled it burning.. Someone Help!!!!

Rachel
July 2009

Same problem here! If it's the motor this soon, they're basically disposable treadmills. What a waste of money.

DupedDeb
April 2009

same problem. how do we fix it??

josh
July 2008

I tried checking the motor but it works fine (right current and temperature), the speed sensor also works ok, anyone have any more ideas?

Marcelo Ivan
October 2007

Did you find the problem? My treadmill is giving me the same display after 7 sec.

Rbt
October 2007

it is more than likely going to be the motor from our experience on the aussie models, Chris-Gym Tech Australia

Chris
October 2007