Recent: 1999 Renault Megane Fuel Pump Location Guide

Mend > Home Heating Systems

Mend Ideal Icos HE 24 Heating Pcb Board

I Have L E on my icos HE 24?

I get L E on my Ideal Icos HE 24, do I have to change my PCB board or is it simpler fault, as it re sets, works for a few minutes then comes up L E again.

andy
October 2007
I know this is an old post but for future readers....I just cycled the power and it fixed this.

Mike
March 2016
HI, don't rush out and buy a pcb just yet. It could just be the flame detect probe or lead is faulty. another common fault with these is the condensate trap blocks up and the condensate partially blocks the flue causing it to go into lockout.

Paul the gas man
October 2007

Automatic Answer

We may have found other answers which could help you.

Click here for Heating Pcb Board

Related Questions ...

Mend boiler pressure blockage
2

Worcester 24i combination boiler pressure loss?

Had fan changed, PCB board changed, internal blockage due(manifold changed) water pressure sensor changed. N... [Read more]
Mend heating hot water pcb board
2

Baxi 105HE - Heating comes on with water?

Heating has been turned off for summer but it comes on when any hot water is used either in kitchen or bathroo... [Read more]
Mend boiler combi heating
1

my worcester 240 combi rsf boiler makes a clatter noise ?

when firing up with the hot water and sometimes the heating, we have to keep resetting it to get the heating a... [Read more]
Mend boiler error code PCB
2

f7 error code-no heating/hot water?

Hope someone can help. My Worcester rd532i condensing boiler was working perfectly fine for year, then 1 day t... [Read more]
Mend combi pump working
2

Sabre 29he plus combi condensing Boiler?

Hi, My boiler is broken down. The pump is working fine and the fan isn't switching on and i can not reset the... [Read more]
Mend central heating boiler water fine checked
1

worcester 28i rsf has no central heating?

my boiler has no central heating but hot water fine. have checked following:-pump unit, combustion fan,resista... [Read more]
Mend fault boiler fires
1

f1 fault on 23 kw jaguar boiler?

boiler fires up on heating and hot water then goes into f1 fault change flame probe and pcb board replaced,fan... [Read more]
Mend ravenheat pcb central heating
1

my ravenheat rsf 84 et boiler?

can someone help me my reavenheat rsf 84 et boiler when you turn on the hot water the boiler fires up ok then ... [Read more]
Mend boiler heating diverter valve
2

pcb board?

I replaced the PCB on my ariston Euro Combi boiler after going through the flow chart. It worked for two weeks... [Read more]
Mend combi boiler heating ideal isar he30
1

no radiators working?

ideal isar HE30 combi boiler, we have hot water but no radiators are heating up, tried reset button ,displays ... [Read more]
Mend baxi pcb heating
3

baxi 105e pcb dip switch settings?

Installed new board,everything working ok except water temp for heating will not rise over 60d .Have tried new... [Read more]
Mend combi pcb modulation
1

help help help?

Please someone help we have had about 4 heating techs out all safe gas registered and no one can help its cost... [Read more]
Mend combi boiler ignite
1

i have a ici caldaie solar 80e combi boiler which won't ignite?

my boiler makes all the right sounds but just locks out every time ? we had a new heat exchanger/diverter fitt... [Read more]
Mend heating pcb board potterton
1

Potterton Suprima?

Recently had PCB Board replaced, and pump was checked and confirmed as working ok. Heating now working fine b... [Read more]
Mend potterton 24 hot
1

potterton performa 24 reset button?

Hey there Woke up today to no hot water/heating. We have had this problem before, and the pcb board was rep... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Home Heating Systems ...