2000 Grand Jeep Cherokee- Who do i get the headlight and taillights to work?
My jeep grand cherokee larado recently had a new motor put in it..since, the left headlight quit working,on bright and dim (the bulb isn't blown) the tail-lights work sometimes, the brake lights only work sometimes, and my windshield wipers will not shut off.. i had to take the fuse out so they would cut off...any suggestions would be great!!!!!
Phillip Wilson- Melissawilson.mmw@gmail.com
October 2007
I don't know if you found an answer to the brake light....I too have a 2000 GJC...and recently fixed my left brake light wich was not working. inside the tailight are 3 plastic/rubber lids with bulbs...the top is your brake light...turn the lid 1/4 counter clockwise and then pull out. Lay bulb/lid aside inside where the bulb was is a black ring of rubber with 3 connecters one by itself and two together. the one by itself is the graounder and will likely be kinda embedded in the balck rubber ring. GENTLY pry up a lil with the edge of your nail or flathead screw driver. press on other contact's too BUT don't accidentally cross them or you'll blow a fuse .....replace bulb/lid make sure you turn it back 1/4 clockwise to lock in. By the way if you blow fuse they are located under steering collum , left side and it's #23....easy to replace....
tamara
February 2008
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix cars.