4 hours ago: Mountfield sp454?

Mend > Washing Machines

Mend Hotpoint Ctd80 Error Filter

f-10?

my dryer is diplaying f-10 error message and turning itself off. i have tried cleaning the fluff filter emtying the water and cleaning the filter at the bottom of the machine. Any ideas ?

my dryer is the hotpoint ultima ctd80

Barry
October 2007
it means the heating stats have blown m8. needs an appliance specialist to come have a look. i have same problem, hope that helps

lee bebbington
November 2007

Automatic Answer

We may have found other answers which could help you.

Click here for Hotpoint Error Filter

Related Questions ...

Mend washing machine error code pump
2

f05 fault ?

So we had this fault come up on our machine hotpoint model number RSG964J . We checked the filter and took th... [Read more]
Mend washer dryer error code drain filter
1

Hotpoint Ultima WD860 washer/dryer error f-05?

Hi, I have error f-05 showing on my machine. I did uncover the bottom plate to unscrew the filter at the f... [Read more]
Mend aquarius washing water
1

Hotpoint Aquarius WDF740 front loading washing Machine H20 Error?

Water enters machine but after about five seconds pressure switch closes input and after this occurs thrice H2... [Read more]
Mend hotpoint filter blocked
1

hotpoint F05 error?

I had an F05 error on my hotpoint machine. Turned off at the mains, removed filter and various items blocked.... [Read more]
Mend washing machine error code drainage
1

hotpoint wmf540 - error f-05?

Hi All, I have a hotpoint wmf540 which cycles well and stops with error f-05, the clothes are wet. I have been... [Read more]
Mend washing machine error code water pump
1

f-08?

"Hello - I have a hotpoint Aquarius WF740 is now showing F-08 error,when error start flashing ,water pump star... [Read more]
Mend hotpoint h20 flashing
1

Hotpoint Aquarius WF64op H20 Error?

When i am doing any wash halfway through the programn H20 starts flashing on the display screen. I have checke... [Read more]
Mend error code blocked filter washing machine
2

have a hotpoint WT640 with Error code f05?

My washing machine stopped mid cycle it's full of water and doesn't seem to drain and error code f05 came up? ... [Read more]
Mend hotpoint washing codes
1

Hotpoint WF541P - flashing display lights?

Hi, I have a HotpointWF541P washing machine & the display lights are flashing, I do not know the error codes ... [Read more]
Mend fill aqualtis water
1

washer doesn't fill 'hotpoint Aqualtis AQ9D 69 U?

We have checked the water supply, connection and filter but the washer will not fill on any cycle, no error me... [Read more]
Mend hotpoint f05 error code
1

Hotpoint ultima wd865 f05?

Washer dryer flashes error code F05 - think its a blockage and cant afford engineer ! How do I find and clean ... [Read more]
Mend washing machine fault code filter
2

what is fault f-08 on washing machine, hotpoint,wf840?

the fault f-08 is comming up on display. emptied filter as it was full of sh.t. but error still there.
Mend washing machine pcb drain
1

Hotpoint WF321 pumping all the time?

HELP!!!! - I have a hotpoint WF321 washer, and it is stuck on the pump cycle all the time - it will do a spin ... [Read more]
Mend washing machine error code fault
2

Hotpoint Aquarius WF321G Washing Machine,lights flashing at end of cycle?

Hi, this just happened this morning, after end of cycle, the 'on/off' and 'wash enhance' lights started flashi... [Read more]
Mend washing machine error code spin
1

HOTPOINT WM75 WASHING M/C ERROR CODE E15?

Display showing E15 when about to spin. Have checked pipes, cleaned filter, replaced pump. This seemed to sort... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Washing Machines ...