Potterton Netaheat 10/16 Electronic cuts out?

Thank you, it was the pump. I turned the speed selector up to 3 and it started working again. Just needed a kick to get started.

Steve O
September 2007

turn up your wall stat
boiler should kick in
when boiler running check the pump to see if it's running.
which will probably be located in your cupboard with your copper cylinder.
also check the diverter valve above the pump it should have a lever on the end push that across afew times may be sticking.


sounds like you may have a sticking pump because of not being used.

hi-spec plumbing
September 2007