how do you adjust tx 5.0 rc sportscraft treadmill belt??

Those manual addresses are no longer valid for 09-2010. YOu can find it here, http://orders.sportcraft.com/PDF/04050_3-1-04-050.pdf

Romerro
September 2010

dont have a manual to tell me how to adjust the belt

martha belton
February 2010

when i turn my treadmill on runs slow and then cuts off

martha belton
February 2010

I am looking to replace the incline adjusters, i.e. grey plastic triangular pieces to adjust incline. Their number is 800-526-0244

Rose
January 2010

For the error code of 3. The front lower cover needs to be taken off the front of the treadmill. There are 4 phillips head screws. Please unplug the treadmill first. When standing on the treadmill to the right side, there is a plastic wheel with hoes in it. When the wheel turns it goes threw a sensor. Either the wheel is not on the roler, the wheel is broke, the sensor has been knocked out of it position or the sensor is broken.

Andy
January 2010

HELLO I HAVE THIS TREADMILL AND ALL IT IS SHOWING IS ONE 7 WHERE THE NUMBERS GO DO ANY ONE OF U HAVE A CODE FOR IT OR A 1 800 NUMBER FOR THIS COMPANY

ANGELA
January 2010

I have an error 3 on my tx5.0rc by sportscraft. How do i fix it?

Sheila
January 2010

there are 2 allen head bolts at the end of the treadmill when adjusting turn both the same amount so that belt doesnt get off center also ther are 2 sets of bolts at end it should be the top bolt on both sides that you adjust

kenny
October 2009

I have an error 3 on my tx5.0rc by sportscraft. How do i fix it

keta
July 2008

http://orders.sportcraft.com/pdf/3-1-04-050.pdf is your user guide

sammo
October 2007

http://orders.sportcraft.com/pdf/3-1-04-050.pdf is your user guide

sammo
October 2007

Here

http://orders.sportcraft.com/pdf/3-1-04-050.pdf

Korleonis
September 2007

go to sportcraft.com or call the customer sevice line... but the website has troubleshooting instructions... 1-800-526-0244 you can ask any question and order parts..

Angela Moreno
August 2007