Hotpoint WM64 Does not pump out all water and/or spin properly?
The Hotpoint WM64 completes the wash cycle but the clothes are wet on completion of the rinse/spin cycle and remaining water appears to be soapy. Is there a filter on this machine that may need cleaning and how would I access it
William Glyn THOMAS (william.glyn@wanadoo.fr)
March 2005
Your machine is designed not to spin if it cannot get rid of all the water. It certainly sounds like a blockage, and the most likely place to look is in the filter.
You need to get to the back of the machine and remove the bottom rear cover. With the cover off, you will see a black hose which goes from the tub to the pump. Incorporated in this hose is a plastic filter.When you remove the hose from the tub, a lot of water will escape. So take precautions!
Ray Thomas
March 2005
I can answer this question...
Hotpoint WM64 Does not pump out all water and/or spin properly?
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix washing machines.