i have a audiosonic colour tv with a remote but no instructions
and the factory is stuck in the left top corner and once its on u cant do nothing with the tv unless u turn it off so we have it on tvav2 so that we dont have to toutch the tv all all other than to turn it off its starting to get very annoying if anyone can help would be very greatfull
Had the same problem and hit the return
button and came off straight away.
Thank you so much
Calaisboi
December 2011
The picture is to wide for the screen. The whole screen is the picture but we are missing bits off the sides. How can I fix it?
Cindy Phillips
July 2010
Thanks Sheree, worked a treat!!!
lee
January 2010
just hold down 'display' key for 5-10 seconds
asish
October 2008
Hi, try this, it fixed my tv with the same problem:
Make certain the TV is receiving a signal.
Press in sequence on the remote [MENU] > [6] >[4] > [8] > [3].
[FACTORY] is displayed.
Press the above sequence again to enter [White Balance] menu.
Press the above sequence again to enter [Adjust] menu.
Press the above sequence again to exit service mode.
Sheree
August 2008
Try hitting the RETURN button on your remote control. This is the button with two arrows chasing each other, just above the DISP button. This turned off the FACTORY text on my Audiosonic KMC TH68.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix televisions.