My machine ( Whirlpool washer) won't agitate?

I'm sure I'm putting this in the wrong place, but I have the same problem, but the tub doesn't drain. I get no errors, I've gone through the entire tech guide and run all the diagnostics and checked everything and I can't seem to find it. The motor is not making any sound on mine, though. There were a couple of strange things in the tests, though. One is checking the resistance on the "off balance solenoid switch", which is what I thought was the problem in the first place... I'm supposed to get 1.2 Ω and if I get anything way over or way under, that's supposed to be the problem. Well, I'm, getting 1.2 KiloΩ (is that how u write it?). Is that just a typo? it seems kinda coincidental that they're both 1.2. Also, the other solenoids are all supposed to measure 800-1200 Ω. I apologize if I posted this incorrectly, I just thought since the problem seemed so close in nature...

Dave
August 2007

The flexible coupling between the motor and transmission has broken - easy repair IF YOU'VE DONE IT BEFORE.

If I'm correct machine will fill with water, empty the water but won't agitate or spin.

Paul
August 2007