I need wiring diagram help for the motor from my Kenmore 110 washer?
I have a motor (P/N 3349644) from a Kenmore washer(P/N 110.82980120) that I want to use. It has two speeds. I have a wiring diagram but the color codes are blured and I can't read it. Which terminal do I need to connect ground to and which the hot wire for each speed? The motor has 6 color coded wires on a terminal bar as follows:white, yellow, blue, black/white, purple, black. Can you help?
I figured it out. The White and the Blue wires are for the high speed. The Violet (purple) and the White/Black wires are for the low speed. However, it won't work if you just put a hot and ground on the White and Blue wires. You have to use the "starter". At the same time you put power on the White and Blue wires, you must also hook up the Yellow and Black wires. The Yellow and Black wires go the the motors "starter". What this does is get the motor turning. Once the motor is turning, the power to the White and Blue wires will contine to keep it turning. Disconnect the Yellow and Black wires 5 seconds after you applied power to both circuits. I wired the Yellow and Black wires to one plug, and the White and Blue wires to another plug. You can also wire them to seperate switches (which I will do eventually). It works great.
David Nichols
July 2007
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix washing machines.