Recent: Home max fs506x?

Mend > Washing Machines

Mend Hotpoint WD62 Washer Dryer Fault

Hotpoint WD62 washer dryer issue?

Hi I have recently moved into a flat with a Hotpoint WD62 washer drier. When using the dryer I am finding there is a lot more fluff than expected coming out, and when drying two pairs of jeans they came out wetter than they started!!

Could this be me using the system wrong or a fault that could and should be looked into, any help is welcome as I have no user manual for this product.

Dustin
July 2007
Perfect thanks for that. Is there anything I can do on this to fix it? or would I need to call someone in? I have no experience with washer dryers or plumbing in general.

Dustin
July 2007
Re wd62 Your problem is an intermitant water outlet pump .It job is to pump the condenced water out when you dry (it drys the cloaths with sream)the water is then pumped out through the grey outlet pipe if does not pump out the drum will fill with condensation and will wet the jeans moore The pump apears to work ok on spin because it is only switched on for a few minutes but when it on the dry cycle its switced on all the time and it overheats and cuts off then comes on again then cuts off etc The fluff build up is because the pump gets rid of the fluff out of the outlet grey pipe and its not doing that

Jim at ARNOLD DOMESTICS 01253 693551
July 2007

Automatic Answer

We may have found other answers which could help you.

Click here for Washer Dryer Hotpoint Fault

Related Questions ...

Mend dryer dry clothes
3

Hotpoint WD640?

Had this washer dryer for many years but still in good order. Recently wanted to dry some clothes but after a... [Read more]
Mend dry washer dryer fault
2

Does the wd860 washerdryer have a filter? it seems to be taking ages to dry?

I have inherited this washer dryer it was showing the fault code mentioned by a previous post, but that seems ... [Read more]
Mend dryer fault couple
2

WD 1085?

My WD 1085 washer dryer normally utterly reliable has developed a fault. Washer fills then within a couple of ... [Read more]
Mend lights flashing fault
1

my hot aquarius wd440 washer dryer has lights 1 and 4 flashing?

this fault with lights 1 and 4 flashing is eprom set up,how can i rectify this
Mend washer dryer error code pcb
1

How do you repair an F12 fault on a Hotpoint Aquarius WD440 washer/dryer?

Hi, I hope someone can help. I have some flashing lights on my Hotpoint Aquarius WD440 washer dryer when I tur... [Read more]
Mend code washer panel
1

hotpoint waher dryer silent fault code 02?

Have a hotpoint washer dryer silent, a code has come up f-02 on panel and it won't do anything, still holding ... [Read more]
Mend washer dryer fault code hotpoint
1

Hotpoint WD645 Washer/Dryer?

How do I reset the fault-code panel, I have forgotten what they told me while it was still under warranty ?
Mend washer dryer fault pump
2

Hotpoint WD420 flashing lights?

Out Hotpoint WD420 washer dryer has stopped working. It is 2 years old. The fault is that when starting the ma... [Read more]
Mend washer dryer trips
1

Hotpoint first edition wd51 1100 washer dryer earth fault?

Hotpoint first edition wd51 1100 washer dryer earth fault on dryer only , trips breaker what shoud i be lookin... [Read more]
Mend fault years times
3

Hotpoint WD640 f-13 fault?

I have had my hotpoint wd640 washer / dryer about 2 years now and the last couple of times that i have put on ... [Read more]
Mend washing machine fault rinse hold
1

Hotpoint wd 440 Washer Drier Fault?

Can anyone help with a fault on my machine. The machine will start any program then after about 10 - 15 secon... [Read more]
Mend miele dryer working hello
5

Miele Novotronic WT 946 i Washer-Dryer - Dryer Not Working - Thermostat?

Hello! We own a 6-year old Miele Novotronic WT946i washer-dryer. For >1 year, the dryer has not been wo... [Read more]
Mend washing machine drum fault code
1

HOTPOINT WD860 BURNT HOLES IN CLOTHES?

when washing cycle ended (not using dryer) i noticed holes burnt into my clothes and pieces of what looked lik... [Read more]
Mend washer dryer fault hotpoint
2

Hotpoint WD860?

Hi all I have a Hotpoint WD860 washer/dryer which has kept on breaking down since a week after we bought it... [Read more]
Mend problem dryer bit
1

Hotpoint WD61 motor fails to run?

Problem with Hotpoint WD61 washer dryer: this may be a bit old now but it’s quite “low mileage” and does... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Washing Machines ...