worcester heat slave 9.24 combi boiler will not stay lit?
my worcester boiler will not stay lit when i light it with the igniter it lights up for a few minutes then goes off again so i have no heating or hot water can anyone help please
i got a worcester heatslave 9.24 and the timer is making a lot of noise. can i change it for a digital timer
tony
March 2013
Hi i have the same problem and i need a knew circit board very hard to get hold of
chez
December 2009
water comes on but heating kicks out after a few seconds ive removed the cover cleaned inside there was carbon and flies which i've removed. still have the same problem heating comes on for 3 secs then cuts out.....any answers will be appreaciated...
ANDY B
January 2009
I agree with Tony. The carbob build up on the flame shaper can stop a direct flame to the thermal sensor and that causes the gas to cut out. Cleaning the guide should help.
Bob
January 2008
mine did the same.i took the front off the boiler and then dissasembled the silver part where the flames are ignited.i found a high build-up of carbon and cleaned everything with a soft wire brush.this cured my problem.
tony
November 2007
I can answer this question...
worcester heat slave 9.24 combi boiler will not stay lit?
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix home heating systems.