My fan heater with thermostat stops running after some 3 or 4 minutes?
I have a simple fan heater with a thermostat (Philips HD 3268/A). It has three fixed settings, cold air (only fan), at 500W and 1000W.
Then it has a dial with a continuous scale where you can set the thermostat to any temperature you want.
It runs OK in cold air and in 500W setting, but in thermostat and 1000W setting it runs some 3 or 4 minutes and stops. Then you have to turn it off for some 10 minutes and it will run again.
Why does it stop?
I had the same problem with our fan heater. Ours use to stop after just 20 seconds. All I did was to unscrew the main housing and then gave it a good clean out with the brush tool on the vacume cleaner to get all the dust and hairs from the heater element, fan and thermostat areas. It now works great!
John
September 2007
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix fan heaters.