Can someone please tell me where the Spring- Governed Idle part # 691859 and the spring governor part# 692211 gets attached. I can't figure out where to clip the springs. A picture would be great.
Thanks
PLEASE HELP! I have the same problem, cant find how the springs attached and cant see the photo.
Alex
August 2010
Been trying for ages to get someone to help me on this - finally found it - thanks a million!
Dave
August 2010
John, Thanks for the photo. I spent almost 2 hours searching for
a photo....
joseph
April 2010
Thanks John for the photo, you saved me a days work and buying part I don't need.
Oli (UK)
April 2010
FOUND THIS PICTURE... HOPE IT HELPS SOMEONE
http://media.photobucket.com/image/BRIGGS%2010A902/geogrubb/Picture3002.jpg
jOHN
July 2009
Both springs attach to the loop in the linkage between the throttle plate and the air plate swivel. The large loop on the governer spring goes to the oval slot on the throttle plate on the left as you look from the front of the engine, and the governed idle spring (691859) goes to the oval slot in the flange on the right.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix lawn mowers.