From under the car there is a tensioner pulley,( the fan belt runs in this pulley ) slacken off the bottom allen bolt on the bracket, the allen bolt is facing down.and loosen the locknut that is on this bolt. Now above the allen bolt on the bracket there are two more allen bolts. Loosen off both bolts slightly, you can now push up the pulley and remove the belt. When you put on the new belt tighten the bottom allen bolt to tension the belt, and tighten the lock nut. Then tighten the other two allen bolts.
ollie
June 2007
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix general d.i.y.