Mend > Lawn Mowers

wiring a snapper rider?

I have a older snapper rider mower in parts, need to know where all the wires go to make it run and stay charged;wiring diagrams red blue black yellow brown white? all good parts just need them back together thanks

ken fausch
February 2005

Snapper Garden Tools, Lawn Mowers Rider Mower Parts

The snapper with kohler engine I found myself working on had a bad needle and seat in the carb which allowed the carb to drain gas into the cylinder and hydrolock the engine. seat was not replaceable so ended up with a new carb for $145 if thats the case with yours be sure to change the oil and filter because the oil gets diluted by the gas standing in the cylinder and leaking past the rings.

carsnsuch
April 2013

The engine is seized

Sam
February 2013

i have an older snapper electric start mower..when i turn key all i get is clicking noise..battery is fine spark plug is new and it has gas..but strangely the cord to engine to pull start it wont come out either,,watsup?

joe
April 2010

http://public.snapper.com/Manuals/
Next to model # find yours on the rear of the mower. Under manual type click parts and then find the wiring diagram.

bret
February 2006

get a multimeter to check which is the charging system

peter
February 2005