My Yardman lawnmower is about a year old. The pull string to start it broke. We bought a new string and removed the casing to get to the old string. We replaced the string;However, the srping has no tension and we can't figure out how to re-coil the spring so we can start the mower.
my pull string on broke on my lawnmower. i brought a new one but i don't know how to install it. i took the plastic cover off but i still can't get to it. do you have a manual that i use or can you help me. it's a yard machine briggs and stratton model # 11b-544C062 4hp.
ebony
September 2008
I need to find out the best way.I know in principle how to do it and done it in the past.You have to put the spring under tension wind the string on the opposite way to the tension,so when you pull the string it tensions up the spring and the recoil pull the string back on the spool.Be careful when to place the spool back as often because its under tendion it will uncoil again,which is annoying.I was hoping to find a diagram of it,which would be helpful,or even a video.
Hope this helps it is an art.
Phil Passfield
June 2008
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix lawn mowers.