Mend Baxi Home Heating Systems

Find out how to mend it for free.

Ask Question

Mend repair fix Baxi home heating systems

Mend home heating systems ...

Mend Home Heating Systems

Mend > Home Heating Systems

Baxi Combi 80 Eco?

The pilot light is out in my boiler and the normal reset switch on the front isn't working. I know there is a switch inside but it is so well hidden that the last time this happened my corgi registered plumber couldn't find it. I paid for Baxi engineer to come out and he stuck his arm in and reset it. I just can't find it but do not want to wait a week with no hot water for the Baxi engineer to come out again. Does anyone know how I can find this switch?

Laura
April 2007

Baxi Heating, Home Heating Systems Baxi Combi 80 Eco

I have a bazillion eco 80 and the problem is my heating comes on with the dial only turned for hot water only can any one out there help me please

Anthony
December 2017

keeps tripping out can you help

michael
March 2014

my heating will not go of even when I turn it to hotwater only

jackie
February 2014

i have a baxi boiler combi 80 eco the dial on the front is showing 0 i have no hot water or heating can i be helped as im lookin for a reset buttton

mike
March 2013

I just returned from holiday in January to a cold house, I had turned off the gas supply. Turned it back on and got a red warning light showing on the boiler front panel. I could not locate any reset button inside the cover. So, looked on this site and found that on my boiler (80ECO) the reset button was on the front panel. You have to turn dial passed the water and heating mark to reset. It even has an "R" for reset showing......soooo simple in the end. Thanks to everyone for the help!!

John
February 2013

Pilot light will not reignite, I have tried the red reset on the left hand side but this appears to be solid? Any ideas.

Grahame

Grahame Smith
December 2012

water leaking rear end of the pump

andrew
August 2012

hi my baxie eco 80 will not switch off told to change the p c b still doing the same help

clive
June 2012

located the reset switch but i cant push it its stuck solid any one have any ideas please?

Bobby
June 2012

Hi, been reseting my 80 Eco infrequently for some time now. It used to trip when the dhw was used. Had a baxi engineer out and he wanted to change the PCB to make the pump run on. After bleeding the radiaters on a regular basis for a while, this problem went away. Now it trips when the burner goes out once thermostat temp is reached (on central heating side). Any ideas what could cause the problem? Should the pump always run on for a short while once the burners gone out? Any help at all would be appreciated. Cheers

Simon H
April 2012

hi i have a baxi 80 eco and the central heating or the hot water will not fire up can someone help me please asap

treacle pie
February 2012

take off front cover and look on the left hand side about halfway up .it has a red push switch,difficult to reach though

stuart evans
December 2011

It's in larger parts.
Here is a link to installation manual, look up the "Safety Thermostat".
I just found the switch and now my boiler is on, thanks to this website!!
Good luck!

http://www.baxi.co.uk/docs/Baxi_Combi_Instant_HE_Installation_and_Servicing_Instructions.pdf

Sat
February 2011

I am a bit stuck, trying to locate the internal reset can't see it - is it inside the white front box where the dials are or inside the larger where the pump is ?

catherine
January 2011

Ours must be a a newer model Baxi 80Eco , as our plumber (non-heating engineer), our 2 builders & myself failed to locate the reset button inside the boiler. Proper heating engineer came out and reset it using the swtich on the front in 30 seconds (the one that is either "off"/"hot water only"/"hot water and radiators"), you twist it past the "hot water and radiators" option and it reset... £35 lesson learnt (it's xmas it could have been a lot more expensive).
Nothing about this switch in the manual either...

PaulL
December 2010

pressure keeps rising and know for sure its not the 2 ball valves, seems to happen more after running the water

steve
December 2010

Excellent. Really helpful. I've just reset mine - but was wondering why mine has had to be reset three times in one week - twice by an engineer and this last time by me??? Anyone have any ideas???

TBOY
November 2010

turn off the boiler first, open the front and on the lefthand side you can see a vertical pipe behind the control panel with two sensors on it, on the lower sensor in the middle there is a gray button this is the internal reset (overheat switch) push this button then fasten the front back on and turn the boiler back on this should work for you until the baxi engineer comes out

ian
November 2010

yes! class answer.....for anyone trying to find the answer in question, look at the bottom of the page. and thanks!

BoliersBack!
November 2010

baxi combi 80e ch works even though the on off selector is in the hw only position or when then timer for the ch is off!!!! help

jack
October 2010

Hi-My heating is working sort of ok but its making a weird grinding sound and i have no hot water at all..!
Can anyone advise before i have to call out an engineer please?? : )

Natalka
April 2010

thank you so much! this helped us a million

helen and grant
January 2010

This site is brilliant, just returned from holiday to find the pilot light out. Just about to call out an engineer when I found the answer here.

Thanx

Grahame
August 2009

i have located the reset switch but i cant push it its stuck solid any one have any ideas please

anthony
August 2009

Brilliant, now I don't have to wait for the plumber, however I can now wash the dishes!!!!!! Problem sorted.

Gloria
May 2009

Its not grey on my model its red,still located between two sensors on the copper pipe,inside the boiler to the left basically same location as the reset dial on the front

edgehead
April 2009

thank you thank you thank you

i have just sat freezing for 14 hours then read your answer it was so simple to follow ,i now have hot water and heat thank you again

a thawing out Anthony
March 2009

i have a baxi eco 80 the switch you are loking for is on the left side of the boiler and is easy to see and reset you cant miss it look strate at the back of the boiler left hand side

thomas
March 2009

THIS WEBSITE AS JUST SAVED ME A LOT OF MONEY,MY BAXI 80 ECO WOULD NOT FIRE UP.I TRIED EVERYTHING FROM BLEEDING THE RADS TO KICKING THE DAM THING.AND THANKS TO DABUY THE SWITCH ON THE COPPER PIPE HAD TRIPED,I RESET IT AND UP SHE FIRED.THANK YOU

CAPSTICK
September 2008

Hi Laura did you managed to find this switch as l'm having the same problem plse help. rituah@hotmail.com

RACHAEL ITUAH
May 2008

Thank You!
I just had the same issue and it sorted me out a treat
I no longer fear the old shower anymore

J C
April 2008

the switch is between the two sensors,which are connected to the copper pipe,it's like a grey plastic stuff,press it,that's all.

dabuy
May 2007

The reset switch is the over-heat thermostat and if it keeps tripping out you need to have the fault traced and rectified instead of keep resetting it.The book that comes with the boiler will tell you where the overheat thermostat is.

u:plumb
April 2007