My RCA 52" projection television model # P52731WK was working fine earlier in the day and I turned it off to go out for a while. When I came back later in the evening and tried to turn it on it would not come on. There is no power light coming on either. I got out my manual and went through all the troubleshooting techniques but it still won't come on. Do you know what is wrong with it and can I fix it?
find the fuse on the power suply its blown replace it or take it to a tv repair guy that can change it if you cant
danny
September 2012
My RCA 52" projection television model # P52731WK was working fine earlier in the day and I turned it off to go out for a while When I came back later in the evening and tried to turn it on it would not come on. There is a power light coming on but it flashes only and then it turns off.
MARIBELMONJE
November 2011
The off and on switch gose bad on this model , all the controls are on a board .If you do not have a full 110 volts like if you have 4 or 5 things in one plug you can drop the power to the TV.This will drop power and the control board will get hot and the switch will brun out.
Doc Bass
January 2006
try unpluging the power coard. this resets the microprosser.leave it un pluged for at least two min.this gives the tv time to reboot,and shut down ckts. to reset.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix televisions.