I need to get at the starter pulley to re-connect the pull-cord string which has come off. Having taken off the first (conical) shaft cover I can't seem to remove the next cover without removing the flywheel. It seems to be a pressed-on fit on to the end of the crank. Any tips please.
Thanks
ok.. put the nut back on the crank shaft.. so its flush with the top. put a pry bar under the flywheel and pry up while hitting the nut with a brass hammer. This is usually dont w/ a flywheel puller. but it seems like your doing this at your house.. you probably should take it to your local shop..
ASE mechanic
April 2007
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix grass trimmers.