Fixing a belt to a Zanussi FL-1085 washing machine?

this machine has a tight fitting/stretch belt....if you are certain you have the correct replacement/original then its a very tight fit..... hook around the motor first then get it on one edge of the drum pulley then turn slowly..... watch your fingers and make sure THE MACHINE IS ISOLATED FROM THE MAINS ....... good luck with the wife :-)

Mike
May 2007

hi put the motor back on,put the belt on to the motor and up to the top pully then pull the top pully round holding the belt in place as you go (like putting a chain back on a bike)
Anymore questions http://www.freewebs.com/msdapudsey1
Just go to the forum

phil grimshaw
April 2007