How do I fix my hotpoint WD860, it goes into test mode?

Hi i had the same problem with my machine and fixed it by holding the on/off button and the start/cancel button both at the same time
hope this helps

Brett
April 2008

hi dave try this
There have been 3 versions of Demo Mode used on these appliances.

Version 1(Production to- Date code 39 March 2005)

To Activate
1. From the Default screen of a programme, after switching the appliance on press both Start/Cancel and On/Off buttons together until d On appears in display.
2. Press the Start/Cancel button only and tESt appears in the screen (Temp & Spin symbols also appear)

To Deactivate

Press the Start/Cancel button until all the console LED's illuminate.
Press both Start/Cancel and On/Off buttons together until
d OFF appears.
The default screen returns and you can select a new programme.
Note:- The default screen information displayed on these models is that of the programme currently selected by the selector knob.

Version 2 ( during Date Code 39 March 2005- to Date Code 42 June 2005)

To Activate

1. Same method as version 1.

To Deactivate

1. Simply press the Cancel button and the appliance returns to default.

Version 3 (During Date Code 43 June 2005 - to date )

To Activate

1. Press On/Off and Start/Cancel together with the top left option button until d On appears.

To Deactivate

1. Press On/Off and Start/Cancel toghether with top left option button until d OF appears.

Anymore questions http://www.freewebs.com/msdapudsey1
Just go to the forum

phil grimshaw
April 2007

just had the same problem and got this answer from another site and it worked on my wf860


Hotpoint’s are designed to go into test mode when the start button and the on/off button are pressed at the same time. If you are stuck in Test mode, simply hold the start button down until it comes out of test mode, then hold both the start buttons and the on/off button down until you see ‘D:end’ (or similar message)."

Sandeep
April 2007