hotpoint first edition WM51 door seal?

hi these are quite easy
remove the powder draw,there are 3/4 screws behind it holding the front panel on remove them and pull away the front panel,mark the wires and remove the front panel,open the door and remove the clip holding the door rubber to the door surround and pull away the rubber,there are 2/3 screws holding the front of the machine on at the top remove them,remove the bottom kick plate, underneith there are 2/3 screws holding the front of the machine on remove them and lift the front of the machine away you can now remove 7 replace the rubber
Anymore questions http://www.freewebs.com/msdapudsey1
Just go to the forum

phil grimshaw
April 2007