when i close my bedroom window i hear a click from the hinge side, this is the side i get a draught through, where it doesnt quite meet the seal. The seal looks intact and of good quality - could it be something to do with the allignment of the hinges? Any suggestions appreciated
At the back of the hinge is the hood ,Try spraying it with wd 40 ,It helps the hinge locate if this doesn't work its new hinge
andyman
March 2007
Sealant will work, though you may have to apply a second bead after the first has cured to get the required depth.
And I appreciate you taking the time to say thanks, as most people don't bother.
Big Softy
March 2007
hi you need a new pair of hinges its the only way 2 solve the problem i hav a window repair company i do this all the time so if u have a repair company near u ring them dont pay anything over 50 pounds hope i have helped u.c.f window repairs.
carl
March 2007
Thanks Big Softy!
the gap is about quarter of an inch.... will sealant still work do you reckon?
Sheryl Long
March 2007
It's hard to say without actually seeing, but a bead of silicon sealant along the gap should solve the draught.
Open the window, then run the silicon along the problem area.
Wait for the silicon to dry before closing.
howtomendit.com for free repair help, information and advice.
