Please read these instructions very carefully before trying anything.
Remember, I am only showing you how this method works. It is then entirely up to you if you wish to use it for your benefit.
Please note that Sky are fully aware of this loophole but they also can't fix
it, at least not for the foreseeable future anyway.
Here are the step-by-step instructions:
1.) Locate the phone line that goes into the back of your Sky box.
2.) Cut through this phone line anywhere (3/4 the length down would be ideal).
3.) Strip the casing from the phone line, and you will see 4 wires. Keep the black and the red on one side and the green and the yellow on the other side.
4.) Discard the other bit of the phone line that goes into the wall. You
can keep it if you want but you will not need it again.
5.) Now you need a 9V oblong battery.
6.) Put the red and black wires on one side of the battery and the green and yellow wires on the other side of the battery.
7.) Hold them in place and go to your Sky Box Office film channel or any Pay Per View channel that you are wishing to view. Put in your pin as usual, and you will find that you are not charged. If you get a "please connect telephone" message - you haven't stripped the wires enough or the battery is dead.
8.) After the screen clears you need to disconnect the wires from the battery. You will never need to reconnect your phone line back to your TV. Sky updates through the satellite on your house and not through the phone line like some people think.
free man
July 2010