How do I fit new drive belt for Zanussi tumble dryer TC481W?

No and no. The cog as you call it: Jockey or tensioner or idler wheel takes up the slack in the belt. this is 1975mm long for a Tc481, can't remember for a Td200. Principle is the same. The motor has a spring attatched to its body. You have to rotate the motor on its fixings to get a different angle of dangle on the pulley. Usually, rotate clockwise whilest fighting belt over same. If you are new at this it will also slip off the drum when you try to get it over the motor shaft. If you dont do it in 10 goes, call ServiceForce.

Ric
January 2005

Hi Chris,
I have the same problem with a td200 machine.
Replacement drive belt appears to fit around main cog and a smaller spindle, but not certain how this is fitted.
Please - anyone out there can you help both of us ?
Many thanks. David

David Hartland
January 2005