Good post. Agreed, it was tricky but not too difficult on nearside one. String (or lace here) great tip.
Remove battery cover with two plastic finger bolts.
I found it hard to get the metal clip off the back of light unit and resorted to big screwdriver which scratched the cover a little. Get the string on the clip now otherwise it tends to hide!
Then pop and slide the cover sideways away from battery to get it out. Not much space.
Small screwdriver and bit of wiggling to remove connector from bulb-not much space to work.
Bit fiddly to get fingers in to release bulb wire clip, pull up slightly and piece of cake.
Fit bulb looking in front of headlight to check alignment.
Clip goes back on, downwards this time.
reconnect wiring.
Check light works.
Slide cover back in from where you hid it and push on with long fingers. Doesn't fit tightly.
Pull string towards windscreen and clip goes on so much easier than it came off.
Refit battery cover.
Phil The Frog
March 2012