ford 6006e flashing display?

A simple fix. Disconnect positive lead from car battery, wait 3 minutes for electrical current to exit vehicle's electronics system, reconnect positive lead to battery, then turn on ignition switch. The display will be blank, but after powering up radio, display will show "12:00," but will not be flashing. Simply set clock and the problem is solved. It's best to start car and let idle for 3 minutes to allow electronics system to fully set to factory settings. This solution also clears car's onboard computer of any glitches that may cause other issues with vehicle.

anperez65
June 2013

Providing you have the code (very important!) I removed the fuse. This reset the unit rather than disconnect the battery. Once I popped the code back in, it worked fine - both the volume and the flashing display.

Tony
February 2011

Hi, i've got the same issue as you (hopefully!!) had, how did you remedy it??

Thanks

Rob

Rob Harvey
June 2007