Mend > Washing Machines

Mend Hotpoint WMA34 Washing Machine Motor Repair

Hotpoint washes, drains, turns ok but doesn't do fast spin?

Washing machine does everyting including turning during wash, but doesn't do fast spin. I'm experienced with fixing our washing machines in the past, but would appreciate advice on this problem.
Since the brushes allow the motor to work during wash cycle, I suspect that the controller is at fault.
Any thougts?

Hotpoint Aquarius Extra (WMA34)

John Duffy
January 2007

Hotpoint Hotpoint WMA34 Household Appliances, Washing Machines Washing Machine Motor Repair

similar fault but one brush appears badly worn. will replace brushes and drive belt but cau u let me know how to remove the control knob and wot the triac looks like. have no electronics knowledge but very confident i can remove a component and resolder. Thanks

Brian Reed
March 2007

That did the trick - Thanks. The brushes were fine, and a new Triac didn't cost too much - RS components was the only place that online that sold a compatible one, though.

John Duffy
January 2007

I presume that you mean the board behind the main rotary switch. I'll check that out and replace it.

Many thanks,

John Duffy
January 2007

hi its going to be the triac on the board(as long as the pump is working correctly)

phil grimshaw
January 2007