4 hours ago: Home max fs506x?

Mend > Microwaves

Mend Neff C17WR01NOB Power Board Problem

getting to power board and schematic?

hi, my neff c17wro1nob microwave has failed again looks to be same problem power board which cost £350 last time so i want to change or repair it myself this time, it looks on first inspection not obvious how to get to the boards if someone can guide me on that and also having difficulty locating a schematic tia, steve

steve
February 2021

Related Questions ...

Mend multi stopped working
1

Bosch Multi tool stopped working PMF 180 E?

Hi, my Bosch PMF 180 E multi tool stopped working in the middle of a job. I've partly dismantled it and check... [Read more]
Mend power supply check
1

Panasonic TXL37G10B power supply problem?

Hi, I have a panasonic tv and would like to check the voltages from the power supply. I have looked at the sc... [Read more]
Mend alarm detector scantronic
19

9600 alarm aux problem?

hi there to cut a long story short i have replaced all my motion detectors on my scantronic 9600, i have fitte... [Read more]
Mend no picture black screen power supply
1

40xv648u-no picture,audio ok?

I have a 40xv648u that has a black screen,no picture-audio is ok.The set was taking longer and longer to come ... [Read more]
Mend need new panel
4

do i need a new panel?

hi i have got a scantronic 9800 alarm panel the other night while in the unarmed mode it started alarming wi... [Read more]
Mend repair switch idea
2

Repair power board Panasonic DMR EX77?

DMR EX77 not switch on. Have someone an idea on wich is the problem in the power board? I have read something ... [Read more]
Mend How to mend it?
1

How to repair a Torque T30 1EB Amplifier?

Hi, I bought a 30W amp on Ebay which was supposed to be working but there is no sound out when I put a Shur... [Read more]
Mend boiler central heating programmer
2

Potterton Programmer not controlling stat?

I developed a fault on my Potterton system as a direct result of trying to change the in room stat (Potterton ... [Read more]
Mend dryer off button
1

CTD00 tumbler dryer stops as soon as I release the on/off button?

Hi, I have a hotpoint tumble dryer, model CTD00, it has recently stopped working. The tumble dryer only works ... [Read more]
Mend power switch switches
1

GBC 4250 Not Powering Up?

I have a GBC 4250 that will not power up. I've changed the power switch, the mother board, the limit switches... [Read more]
Mend start dash board
1

iveco daily 35s9 wont start?

Anyone able to tell me what links my glow plug light on the dash board, to the vehicle not starting? it was le... [Read more]
Mend stopped power lights
3

old stannah stair lift mod 229?

lift stopped mid way as if no power no lights etc - checked 240v to connection box all OK nothing at key switc... [Read more]
Mend no picture no sound troubleshooting
1

Bush LT26MICA has no picture or sound - what's the likely cause?

Bush LT26MICA TV stopped working today. It still powers up as the power LED is working. The remote works as I ... [Read more]
Mend working perfectly power
1

What would u recommend the problem is?

I resited a 38 cxi working perfectly before, filled it up put power to it, got 240v to the on off switch and f... [Read more]
Mend How to mend it?
1

error on brother pe150?

error message say check thread entangeled/check bent needle.service manager suggest i change power supply and ... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Microwaves ...