Recent: Fix food processor motor?

Mend Russell Hobbs Blenders/Mixers

Mend Kitchen Appliances, Blenders/Mixers
Find out how to mend it for free.

Ask Question
Mend Kitchen Appliances, Blenders/Mixers
Mend repair fix Russell Hobbs blenders/mixers

Mend > Blenders/Mixers

Mend Russell Hobbs Hand

How to disassemble the lid of a Russell Hobbs Desire 3 in 1 hand blender 2?

I have a Russell Hobbs Desire 3 in 1.

The lid of the mixer jug (see part 7 on page 2 of the manual)

https://cdn-img.russellhobbs.com/manager/russellhobbs_com/PDFs/24700-56%20Desire%203%20in%201%20hand%20blender%20IB%20T22-5003824%20internal.pdf

was put in the dishwasher. Consequently it has fluid inside. I want to open it, clean it properly and reassemble. On the underside is a screw with a special head.

Does anyone know where I might get the special tool to unscrew it?

Adam Nealis
April 2020
This question is quite old but hopefully someone will find it useful.

You need a Torx screw (T10 worked for me) https://en.wikipedia.org/wiki/Torx

After unscrewing, you need a dull knife (I used a standard table knife) to pry open the top of the lid. There is a small indentation on the lid where you can insert the knife. The lid pops out and you can clean the inner part.


P
October 2023

Automatic Answer

While you wait for answers, we may have found some information which could help you.

Click here for Russell Hobbs Hand

Mend Kitchen Appliances, Blenders/Mixers
Mend repair fix Russell Hobbs blenders/mixers

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Kitchen Appliances, Blenders/Mixers
Mend repair fix Russell Hobbs blenders/mixers