Mend > In-Car Audio

GRUNDIG 200 in SAFE Mode?

Hi all,
Hope someone can help. I had to disconnect the Grundig 200 in my Corsa and since reconnecting I am unable to enter the Code. I know my code is correct as I have used it before. My display is showing "SAFE" and I am unable to get to the code entry I have the instructions and have done it several times in the past.
I have also left the radio on for hours hoping that the reset timer will kick in but it does not.
My manual says to take it back to a Vaxhaul Dealer to have it reset if it shows "SAFE" but this will probably cost more than the radio is worth.
Any help appreciated.
Cheers

Grundlewood
December 2006

Grundig Grundig 200 Audio, In-Car Audio Grundig Vauxhall Corsa

anyone got an unlock code ! grundig car 200 serial no gm0200w6096206

gary tordoff
December 2015

Hello I have Grundig car200 and I have the code but I'm stuck in safe mode, and the display only show SAFE, and no bip when turn on the radio with down AS Key and ingnition on . Yesterday I leave the radio on but nothing happened. How can leave the SAFE mode and I introduce the code? Regards

pata2004
November 2015

What about the 100 model?

Nick
November 2015

iv tried every thing i dont get a beep or nothing only comes up with safe

jane
March 2014

just tried what the guy,s said and wow it worked thank,s to all.

reg
April 2012

I have same problem, just leave the radio on for 24 hour and the counter will reset automatically

Sameh Salem
July 2011

try 8109

ahmed
March 2010

switching the car on and whilst pressing AS till yu hear the beep works!!! just sorted mine now! thanx

jermaine08
June 2009

Push the AS button and keep it pushed, at the same time turn on the ignition.
After this you will hear a beep sound. Now you can release the AS button.
and when you have entered the code hold the as button till it beeps again all done enjoy

besty25
June 2008

Grundig 200 car radio can decode in the next way:

First step: Switch off the radio and the ignition as well.
Second step: Push the AS button and keep it pushed, at the same time turn on the ignition.

After this you will hear a beep sound. Now you can release the AS button.

Now you can enter the code in the next way: The first number can be set with the button ''1'', the second number of your code can be set with button ''2'' and so on. By pushing the ''1'',''2'',3'',''4'' buttons the value indicated in the screen will be increased by one. So if the first number of your code is 5 then you have to push the button ''1'' 5 times.

I hope the above are clear.

zsolt Dancsó
January 2007

Hi,
Tried again as you suggested but got the same result Display showing SAFE and no beeps. Car Radio Model is a Grundig 200 (D) Serial No is GM0200T1886419 and the unlock code is 8834
Cheers

Grundlewood
January 2007

hi
did u turn the key in ignition positione do it and turn the radio press AS and hold turn off the radio wil pressing AS count to 10 wil pressing AS and turn on the radio wil pressig AS till you hear Beeb enter your code no press AS till you hear Beeb if doesnt work ineed the model no and the serial no
im not gonna left u till it work
mohammadrajaalogain@yahoo.com

mohammad nazmi
January 2007

Thanks Both
Tried the AS suggestion but still stays in safe mode. Buying a new cd/radio(S) is what caused the problem, tried four radios and three different models all fitted by Halfords, none of them would work????
cheers

Grundlewood
January 2007

hi turn on your car press the AS key and hold turn off the radio count to 10 turn onthe radio
you need to keep pressing AS when u do the stips the AS key is the enter by press and hold
this is my work unluking radio codes

mohammad nazmi
January 2007

buy a new radio cd plYER M8 IT WILL BE CHEAPER.

SPARKY1978
January 2007