If not the door seal damage "lip". Could be a blockup fabric conditioner compartment causing water to leak from the soap draw front then it trickles down the curvature of the door to 6o/clock position which gives the impression it the seal at fault when it isn`t
Andy
November 2022
Had something like this a while back. The door seal had been moved by something being dragged out of the machine, over the seal and it had pulled out a the bottom, from under the retaining spring.
Have a good look all round the seal where it is fixed to the machine and check it is seated properly.
Fortunately not too tricky to correct
acp
March 2017
Check around the glass for any build up of soap that will stop the seal from seating properly. If glass is all clean then check the rubber seal for splits or hole.