Mend > Dishwashers

my 918TD continually shows an F1 error I rested the machine for 3 days and?

then it worked for a couple of washes before blowing the fuse in the main box half way through a wash can anybody assist me with an answer and a possible date for this model so I can determine its age

Andymac
December 2016

Kitchen Appliances, Dishwashers Machine Worked Couple

F1 means flood switch in the base tray has been activated. There will be a leak somewhere. You need to take off the lower kick panel, dry out the tray and then run it with panel off and watch for leaks. Switch power off at wall power point before touching any wiring inside panel. That model is about 16 to 20 years old.

Lincoln Appliance NZ
December 2016

Automatic Answer

We may have found other answers which could help you.

Click here for Machine Worked Couple

Find out how to mend dishwashers

Clear E1 error code on smeg dishwasher with no water or leak?

Why is dishwasher not fully drained of water?

Water won’t pump out?

Hotpoint Start/Pause button flashing?

Simpson Silencio 850 Dishwasher?

How to switch on beep on BEKO dishwasher?

Which way up is the upper spray arm - with holes uppermost o?

K8D45517?

Why is my SMEG Dishwasher showing E1 without water in tray?

How can I mend my Zanussi ZDLN1512 dishwasher?

How to install new knob for smeg dishwasher Type 10028; mod:?

Miele G1222 series dishwasher F14 error message?

Mend Dishwashers

Related Categories

Mend > Dishwashers

my 918TD continually shows an F1 error I rested the machine for 3 days and?

Automatic Answer

my 918TD continually shows an F1 error I rested the machine for 3 days and?

I can answer this question ...

my 918TD continually shows an F1 error I rested the machine for 3 days and?

How to mend ...

Mend dishwashers ...

Clear E1 error code on smeg dishwasher with no water or leak?

Why is dishwasher not fully drained of water?

Fisher & paykel Elba DW60CSW1?

BEKO dishwasher tripping the RCD?

Beko dl1243apw dishwasher?