Recent: Throttle issue?

Mend 9448 Home Alarm Systems

Mend Security Systems, Home Alarm Systems
Find out how to mend it for free.

Ask Question
Mend Security Systems, Home Alarm Systems
Click here to mend 9448 home alarm systems

Related Categories

Mend Car Alarm Systems
Car Alarm Systems

Mend > Home Alarm Systems

Mend Security Systems, Home Alarm Systems

CooperMenvier alarm 9448+ Fault?

I hope you can help me with this problem I have. I have a 9448+ Menvier system, the 12vac fuse had blown The system has not been touch for at least 5 weeks and the battery is very low in charge? I have replaced the fuse and the system activated inside only, put user code in the alarm stopped? Now the green LED light is flashing but very dim. Will this resume normal operatios after 18 Hour charge.

PLB

PLB
December 2015
nope the green light is a mains failure indicator could be a duff transformer check to see if the plastic that holds it in place is deformed,if it is the you could be looking at a new panel check voltage at the blue leads going onto the pcb remove the plug from the pcb first you should get 17 .5 volts you may get away with a new trannie ,but i doubt it,hope this helps

gts
December 2015

Automatic Answer

We may have found other answers which could help you.

Click here for Alarm 9448 Help

Mend Security Systems, Home Alarm Systems
Click here to mend 9448 home alarm systems

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Security Systems, Home Alarm Systems
Click here to mend 9448 home alarm systems