How can I get to the bulbs on a Berry 3400 fire? ?

1.1 To gain access to the lamps, open the firebox door, then remove the two
screws  securing the fuel effect bed/grate assembly
Lift the fuel effect up slightly to clear the ledge at the base of the glass viewing
screen, tilt one end up first
and then lift the fuel effect out of the firebox
1.2 Carefully rotate the lamp anti-clockwise ➥ until it comes out of its holder
Replace the defective lamp with a 240V, 40 watt E14 SES clear candle lamp,
rotating the lamp clockwise ➦ in the holder until it is fully home. Do not
overtighten.
1.3 Refit the fuel effect, ensuring that the rear edge locates on the ledge at the
base of the glass viewing screen then refit the coal.

toptrish
September 2015