how do i check the connection from my cordless drill battery to the drill . do i have to take it apart to see if theres a short or something the drill stops +starts
Provides electrical cleaning and mechanical lubrication for contacts, switches and relays • Removes tarnish, dirt, grease, dust, oil and other deposits• Prevents arcing between dry contacts• Inaccessible areas are accessed by the extension nozzle supplied with the can• Supplied in a 200ml aerosol can
This might fix a switch problem but it will cost ÂŁ4.99 to find out
It's solved problems for me...
April 2015
You have a difficult problem - as far as I know batteries are usually sealed - not made to be taken apart.
Your problem will be a poor connection one place or another - an intermittent open circuit in the battery itself - in the drill body or the switch - the switch has moving parts so it's a most probable cause. It will not be a short - a short will cause a fire - you would know about it.
If it were my drill I would give up on it - a successful repair is most unlikely.
Good luck...
April 2015
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix drills.